Are you planning to dig a sand point well but unsure where to start? Comparing the top sand point well kit factories is crucial for making an informed choice. Discovering the best options can save you time and money. Let’s dive in and find the perfect kit for your needs!
Sand Point And Pitcher Pump Kit – Well WaterBoy Products
Product Details: 1 1/4 inch Sand Point Pump Kit with 80 Gauze, includes sand point with stainless steel jacket, heavy duty pitcher pump, drive couplings, and drive cap.
Technical Parameters:
– Maximum lift: 25 feet
– Approximate water yield: 3 gallons per minute/per square inch of screen area
Application Scenarios:
– Shallow well applications for areas with a water table of 25 feet or less
– Short-term emergency water supply
Pros:
– No electricity required for operation
– Can be driven into all types of soil
Cons:
– Not intended for installation in areas of large or solid rock
– Requires local purchase of 1 1/4″ x 5′ galvanized pipe
Water Source Well Point, 2 in. x 36 in., WPF3680 – Tractor Supply Co.
Product Details: Water Source Well Point, 2 in. x 36 in., WPF3680. This stainless-steel well point drives into all types of soil and is engineered for easy driving, effective sand control, corrosion resistance, and strength.
Technical Parameters:
– 2 in. male threads
– 80 mesh screen
Application Scenarios:
– Used for water extraction in various soil types
– Compatible with 2 in. drive coupling and 2 in. drive cap
Pros:
– Corrosion-resistant stainless steel construction
– Three-step bonding design prevents screen peeling
Cons:
– Limited availability of additional parts at retail locations
– May require specific tools for installation
Driven Sand Point Well Advantages and Disadvantages – Off Grid Nerd
Product Details: Sand point well, also known as a driven well, is a shallow water source extracted from sandy soil, typically not more than 25ft below ground.
Technical Parameters:
– Depth: 10 to 30 ft
– Cost: $1200 to $1500
Application Scenarios:
– Off-grid living
– Household water supply
Pros:
– Inexpensive installation
– Easy to install and portable
Cons:
– Low discharge rate
– Risk of contamination
DIY Sand Point Water Well in a Day – Well WaterBoy Products
Product Details: DIY sand point well kit with pitcher pump for shallow water table applications.
Technical Parameters:
– Yield: approximately 3 gallons per minute (GPM)
– Typical installation depth: no more than 30 feet with 1 1/4″ or 2″ pipe
Application Scenarios:
– Emergency water supply for households, livestock, and gardens
– Temporary water source in developing countries
Pros:
– Cost-effective compared to drilling a bored well
– Easy installation and maintenance
Cons:
– Relatively low yield
– Limited to shallow water tables and specific soil conditions
4 Low-Cost Ways to Install a Shallow Sand Point Well – Leaf House Tea
Product Details: Sand point well for drawing water from 10 to 30 feet underground, consisting of galvanized steel or PVC pipe sections with a well-point.
Technical Parameters:
– Pipe diameter: 1-1/4 inches or 2 inches
– Well-point length: 36 inches
Application Scenarios:
– Homesteaders and farmers seeking off-grid water supply
– Emergency backup well installation for compromised municipal supplies
Pros:
– Inexpensive and DIY-friendly installation
– Effective for accessing shallow water tables in sandy soils
Cons:
– Labor-intensive installation methods
– Risk of borehole collapse during augering
Water Source 1-1/4″ x 36″ Stainless Steel Well Point – Menards
Product Details: Water Source 1-1/4″ x 36″ Stainless Steel Well Point, Model Number: WP3680, SKU: 6911973, Everyday Low Price: $49.99, Price After Rebate: $44.49
Technical Parameters:
– 1-1/4″ male thread
– 80 mesh screen, Screen length: 36″
Application Scenarios:
– Drilling wells in various soil types
– Effective sand control in well water systems
Pros:
– Corrosion resistant and strong design
– Easy to drive into all types of soil
Cons:
– Requires additional components like drive coupling and cap
– Mail-in rebate process may be cumbersome
H2OPRO Steel Well point – Lowe’s
Product Details: STAR Water Systems Steel Well Point
Technical Parameters:
– Material: Steel
– Type: Well Point
Application Scenarios:
– Residential water supply
– Irrigation systems
Pros:
– Durable construction
– Effective for groundwater extraction
Cons:
– Potential for rust over time
– Installation may require professional assistance
Water Source 2 in. x 36 in. Well Point WPF3680 – The … – The Home Depot
Product Details: Water Source 2 in. x 36 in. Well Point WPF3680
Technical Parameters:
– Model # WPF3680
– Dimensions: 2 in. x 36 in.
Application Scenarios:
– Used for drilling in various types of soil
– Compatible with 2 in. drive coupling and 2 in. drive cap
Pros:
– Stainless steel point for durability
– 3-step bonding design protects the screen against peeling
Cons:
– Limited to specific drive coupling sizes
– May not be suitable for all soil types
Drill A Well In Your Backyard – DELUXE Ready-To-Drill Kit!
Product Details: Terragrinder deluxe ready-to-drill kit for drilling a well up to 100′ deep, priced at $699.95 with free shipping in the continental U.S.
Technical Parameters:
– Includes Terragrinder Tool, Deluxe Rock/Clay/Sand drilling bit for 4″ casing, an…
– Requires additional local items: 150′ of 3/8″ air hose, 160′ of 1″ PVC pipe, 100…
Application Scenarios:
– Ideal for homeowners wanting to drill their own well in their backyard.
– Suitable for areas where a well can be drilled up to 100′ deep.
Pros:
– Cost-effective compared to other well drilling kits on the market.
– Comes with free shipping to the continental U.S.
Cons:
– Requires additional local materials and tools not included in the kit.
– Air compressor must be rented or owned, which may add to overall costs.
SAND POINT WELL PUMPS – apocalypse-wellpumps
Product Details: Sand Point Well Pumps designed for both 1-1/4 and 2 inch sandpoint wells. Superior to pitcher pumps as it will not freeze, does not need to be primed, and has no leathers.
Technical Parameters:
– Pumps up to 2gpm
– Includes 1/2 inch PVC drop pipes
Application Scenarios:
– Residential water supply from sandpoint wells
– Irrigation systems in areas with shallow water tables
Pros:
– No freezing issues
– Complete pump kit with all necessary parts included
Cons:
– Requires additional couplers for 2 inch wells
– Length of pump must be shorter than total depth of the well
Related Video
Comparison Table
| Company | Product Details | Pros | Cons | Website |
|---|---|---|---|---|
| Sand Point And Pitcher Pump Kit – Well WaterBoy Products | 1 1/4 inch Sand Point Pump Kit with 80 Gauze, includes sand point with stainless steel jacket, heavy duty pitcher pump, drive couplings, and drive cap… | – No electricity required for operation – Can be driven into all types of soil | – Not intended for installation in areas of large or solid rock – Requires local purchase of 1 1/4″ x 5′ galvanized pipe | waterbuckpump.com |
| Water Source Well Point, 2 in. x 36 in., WPF3680 – Tractor Supply Co. | Water Source Well Point, 2 in. x 36 in., WPF3680. This stainless-steel well point drives into all types of soil and is engineered for easy driving, ef… | – Corrosion-resistant stainless steel construction – Three-step bonding design prevents screen peeling | – Limited availability of additional parts at retail locations – May require specific tools for installation | www.tractorsupply.com |
| Driven Sand Point Well Advantages and Disadvantages – Off Grid Nerd | Sand point well, also known as a driven well, is a shallow water source extracted from sandy soil, typically not more than 25ft below ground. | – Inexpensive installation – Easy to install and portable | – Low discharge rate – Risk of contamination | www.offgridnerd.com |
| DIY Sand Point Water Well in a Day – Well WaterBoy Products | DIY sand point well kit with pitcher pump for shallow water table applications. | – Cost-effective compared to drilling a bored well – Easy installation and maintenance | – Relatively low yield – Limited to shallow water tables and specific soil conditions | waterbuckpump.com |
| 4 Low-Cost Ways to Install a Shallow Sand Point Well – Leaf House Tea | Sand point well for drawing water from 10 to 30 feet underground, consisting of galvanized steel or PVC pipe sections with a well-point. | – Inexpensive and DIY-friendly installation – Effective for accessing shallow water tables in sandy soils | – Labor-intensive installation methods – Risk of borehole collapse during augering | leafhousetea.com |
| Water Source 1-1/4″ x 36″ Stainless Steel Well Point – Menards | Water Source 1-1/4″ x 36″ Stainless Steel Well Point, Model Number: WP3680, SKU: 6911973, Everyday Low Price: $49.99, Price After Rebate: $44.49 | – Corrosion resistant and strong design – Easy to drive into all types of soil | – Requires additional components like drive coupling and cap – Mail-in rebate process may be cumbersome | www.menards.com |
| H2OPRO Steel Well point – Lowe’s | STAR Water Systems Steel Well Point | – Durable construction – Effective for groundwater extraction | – Potential for rust over time – Installation may require professional assistance | www.lowes.com |
| Water Source 2 in. x 36 in. Well Point WPF3680 – The … – The Home Depot | Water Source 2 in. x 36 in. Well Point WPF3680 | – Stainless steel point for durability – 3-step bonding design protects the screen against peeling | – Limited to specific drive coupling sizes – May not be suitable for all soil types | www.homedepot.com |
| Drill A Well In Your Backyard – DELUXE Ready-To-Drill Kit! | Terragrinder deluxe ready-to-drill kit for drilling a well up to 100′ deep, priced at $699.95 with free shipping in the continental U.S. | – Cost-effective compared to other well drilling kits on the market. – Comes with free shipping to the continental U.S. | – Requires additional local materials and tools not included in the kit. – Air compressor must be rented or owned, which may add to overall costs. | www.drillawell.com |
| SAND POINT WELL PUMPS – apocalypse-wellpumps | Sand Point Well Pumps designed for both 1-1/4 and 2 inch sandpoint wells. Superior to pitcher pumps as it will not freeze, does not need to be primed,… | – No freezing issues – Complete pump kit with all necessary parts included | – Requires additional couplers for 2 inch wells – Length of pump must be shorter than total depth of the well | www.apocalypsewellpumps.com |
Frequently Asked Questions (FAQs)
What is a sand point well kit?
A sand point well kit is a collection of tools and materials designed to help you easily install a shallow well for accessing groundwater. It typically includes a sand point, drive pipe, and necessary fittings, allowing you to create a well in sandy or loose soil conditions.
How deep can I install a sand point well?
You can generally install a sand point well up to 25 feet deep, depending on the soil type and water table level. However, the best results are often achieved in depths of 10 to 20 feet, where groundwater is more accessible.
Do I need a permit to install a sand point well?
In many areas, you may need a permit to install a sand point well, especially if you’re in a regulated zone. It’s a good idea to check with your local government or water authority to ensure compliance with any regulations.
What kind of maintenance does a sand point well require?
Maintenance for a sand point well is relatively simple. You should regularly check for debris, ensure the well cap is secure, and monitor the water quality. It’s also wise to test the water annually for contaminants to keep it safe for use.
Can I use a sand point well for drinking water?
Yes, you can use a sand point well for drinking water, but it’s essential to have the water tested for safety. Contaminants can vary based on location, so regular testing will help ensure that the water is safe for consumption.
